Powering Qatar's Energy

Oil & Gas Fire & Gas (F&G)
and E&I Systems in Qatar

Certified engineering and technical services for refineries, LNG facilities in Qatar, and petrochemical plants ensuring maximum reliability across the energy sector in Qatar.

Consult with Our Team
Industrial Solutions

Fueling Efficiency through Precision

ARTES provides specialized engineering support for critical Qatar energy infrastructure. We understand the high-stakes environment of Oil & Gas - Fire Electrical & Instrumentation and deliver solutions that prioritize safety, uptime, and regulatory compliance for complex industrial projects across Qatar.

From asset integrity checks to mechanical overhauls, our technical team is equipped to handle the most demanding requirements of the energy sector in Qatar.

Certified
Technical Specialists
Zero
Tolerance for Gaps
Oil & Gas Fire & Gas Systems Qatar
Integrated Disciplines

Three Disciplines. One Partner.

Our multidisciplinary teams operate across fire & gas safety, electrical engineering, and instrumentation — delivering fully integrated systems that connect seamlessly with the advanced Fire Protection Systems Qatar requires to protect major facility assets.

Fire & Gas Systems

As a leading gas detection system supplier Qatar counts on, we engineer hazard detection and suppression for hydrocarbon-rich onshore, offshore, and pipeline environments.

  • Flammable & toxic gas detection (fixed & portable)
  • Flame detection — UV/IR, multi-spectrum, optical
  • Heat & smoke detection for classified areas
  • Integrated F&G control panels & voting logic
  • Fire suppression: CO₂, FM-200, deluge, water mist
  • Blowdown & ESD (Emergency Shutdown) systems
  • SIL assessment Qatar compliance & verification

Electrical Systems

Reliable, code-compliant power distribution and electrical engineering oil and gas Qatar solutions for process facilities and hazardous areas.

  • MV / LV switchgear, MCC & distribution panels
  • Ex-rated electrical installations (Zone 1 & Zone 2)
  • Cable routing, tray design & installation
  • Earthing & bonding, lightning protection
  • UPS systems, battery backup & critical power
  • Electrical area classification drawings & studies
  • Electrical heat tracing for process lines

Instrumentation & Control

Precision measurement and control systems delivering instrumentation engineering Qatar expertise for process visibility and automated safety responses.

  • Process instrumentation: pressure, temperature, flow, level
  • Control valves & actuated isolation valves
  • DCS / PLC / SCADA integration & interfacing
  • Safety Instrumented Systems (SIS / SIL)
  • Instrument loop design, hook-up & calibration
  • Junction boxes, marshalling & field panels (Ex-rated)
  • HART, Fieldbus & wireless transmitter systems
Operational Reach

Built for Qatar's
Energy Landscape

From upstream gas processing to downstream petrochemical facilities, ARTES provides comprehensive LNG plant engineering services, supporting major North Field projects and critical Energy infrastructure in Qatar.

01 Upstream — Oil & Gas Production
02 LNG & Gas Processing Facilities
03 Petrochemical & Refinery Plants
04 Offshore Platforms & FPSOs
05 Power Generation & Utilities
06 Industrial & Manufacturing
REGIONAL EXPERTISE
Hazardous Area Classification Qatar
Technical Rigour

Hazardous Area Expertise at Every Layer

Working in Qatar's oil & gas sector demands more than technical knowledge — it requires an intimate understanding of hazardous area classification Qatar standards, risk assessment, and the engineering rigour that hazardous environments demand for key industrial projects across the country.

ARTES engineers are experienced in ATEX, IECEx, and NEC Division-classified systems, providing the high-quality Ex-rated electrical installation Qatar facilities rely on. We ensure every ATEX certified installation Qatar projects require is executed with strict compliance at major LNG facilities.

We work directly with QatarEnergy contractors, EPCs, and asset owners — understanding their documentation standards, permit-to-work procedures, and commissioning protocols to secure critical Energy infrastructure in Qatar.

ATEX Directive IECEx Certified Ex-d Flameproof Ex-e Increased Safety Ex-i Intrinsic Safety Ex-n Non-Sparking Ex-p Pressurised NEC 500 / NEC 505
Project Capabilities

Full-Cycle Delivery

From FEED studies to final handover, our project execution capability and specialized LNG plant engineering services span every phase of the project lifecycle.

01 / FEED & CONCEPT

Front-End Engineering Design

Concept studies, basis of design, and specialized Engineering & Design Services Qatar projects require for initial F&G mapping.

02 / DETAILED DESIGN

Engineering & Procurement

Full technical drawings, loop diagrams, and specialized Industrial Procurement Services Qatar operations utilize for hazardous areas.

03 / FABRICATION & ASSEMBLY

Panel Design & FAT

Design and assembly of control panels, Marshalling Cabinets, and F&G racks with full Factory Acceptance Testing.

04 / FIELD INSTALLATION

Construction & Hook-up

Ex-certified field installations, cable termination, tray work, and instrument hook-up by trained technicians.

05 / TESTING & START-UP

SAT & Commissioning

Site Acceptance Testing (SAT), hot/cold loop checks, cause-and-effect verification, and system handover.

06 / LIFECYCLE SUPPORT

Asset Integrity & AMC

Periodic maintenance, calibration services, and hazardous area compliance audits under a comprehensive Annual Maintenance Contract Qatar facilities depend on.

Compliance Rigour

ENGINEERED TO CODES

Regulatory compliance isn't just a requirement — it's the foundation of reliability in oil & gas operations. We align every project with applicable industrial codes and QatarEnergy specific engineering standards.

QCDD
Qatar Civil Defence Fire Codes
NFPA
National Fire Protection Association
ATEX
Atmosphères Explosibles Directive
IEC 61508
Functional Safety of Electrical Systems
IEC 61511
Safety Instrumented Systems (Process)
ISA-S84
Application of SIS for Process Industries
The ARTES Advantage

Why Choose Our Specialised Team

As a dedicated oil and gas contractor Qatar trusts, we combine certified technical expertise with a deep understanding of local safety standards.

Ex-Certified Personnel

Engineers and technicians trained in CompEx and hazardous area installation protocols.

Safety-Life Focus

Prioritising Safety Instrumented Systems (SIS) and functional safety at every layer.

24/7 Response

Maintaining on-call capability for critical instrumentation outages and F&G system troubleshooting.

Asset Integrity AMCs

Long-term maintenance contracts structured to ensure uptime and regulatory audit-readiness.

FAQ

Frequently Asked Questions

Find answers to common questions about our Fire & Gas safety systems, E&I engineering, and compliance solutions in Qatar.

What is a Fire & Gas (F&G) system?

An F&G system is a safety monitoring setup that detects fires, explosive gas accumulation, or toxic leaks, and automatically initiates safety actions like alarms, deluge activation, and shutdowns.

What is SIL assessment in oil and gas projects?

Guided by standards like IEC 61508/61511, SIL assessment measures a Safety Instrumented System's reliability, determining the required risk-reduction level (SIL 1 to SIL 4) for process safety.

What is ATEX certified installation?

An ATEX installation complies with explosive atmosphere directives, ensuring that electrical and mechanical equipment in hazardous zones is certified not to spark or act as an ignition source.

What is an ESD system in oil and gas facilities?

An Emergency Shutdown (ESD) system is a fail-safe process safety barrier designed to rapidly isolate process zones, stop fuel flow, and prevent minor upsets from escalating into catastrophic events.

Do you provide LNG plant engineering services in Qatar?

Yes, ARTES offers comprehensive E&I and F&G engineering, testing, and lifecycle maintenance for LNG plants in Ras Laffan and across Qatar, aligned with QatarEnergy standards.

Do you provide Ex-rated electrical installation in Qatar?

Yes, our CompEx-trained technicians provide certified Ex-rated electrical installation across Qatar, handling Zone 1/2 distribution, cabling, and enclosures under QCDD and IECEx codes.

Get in Touch

Ready to Secure Your Facility?

Talk to our specialised energy sector team about your electrical, instrumentation or fire safety requirements. We speak your language — engineering excellence.

Request a Technical Consultation